If your wireless mouse is slow to respond, there may be a delay for the following reasons
If your wireless mouse is slow to respond, there may be a delay for the following reasons:
1. Replace the battery or charge: Please ensure that the mouse is fully charged. If the battery power is too low, the mouse movement speed will slow down.
2. Clean the mouse lens: The photocell at the bottom of the mouse will be affected by the accumulation of dust and dirt, which will affect the sensitivity of the mouse. The lens at the bottom of the mouse can be gently cleaned using a clean cotton swab.
3. Check the wireless signal: If the signal quality of the wireless mouse connection is not good, it may cause the movement speed to slow down. You can try to plug the wireless receiver into a different usb port, or try to keep the wireless receiver and the mouse closer Within the distance to improve signal quality.
Update the driver: If the mouse driver is out of date or damaged, it may slow down the mouse movement. Check the device manager on your computer, find the mouse and try updating the driver.
If your Bluetooth keyboard does not connect, the following conditions
may exist
1. Whether the power switch of the Bluetooth device is turned on;
2. The code key is not pressed when connecting;
3. The mouse battery is low;
4. Bluetooth drive is not installed;
5. Bluetooth driver version is too low;
Operating system issues;
7. The pair code times out, delete the device and pair it again.
1. Turn on the power switch, the red indicator light will be on for three seconds and then go out;
2. Press the code key, the red indicator light flashes, and the keyboard enters the code connection state;
3. Operate the tablet computer and follow the prompts to complete the code comparison process.
In addition, the following situations need to be explained
1. For the first time, you need to press the code key to connect the code; when you turn on the keyboard again, it will automatically connect with the tablet.
2. The valid time of the code is 2 minutes. During this period, if there is no connection with the tablet computer, the keyboard will automatically exit the code-on state.
